Message ID | 20180212170413.14471-1-tim@tn-x.org |
---|---|
State | Superseded |
Headers | show |
diff --git a/buildscript b/buildscript index ab092da..898120e 100755 --- a/buildscript +++ b/buildscript @@ -195,18 +195,14 @@ prebuild() { if [ 0 -ne $? ]; then version=$(git log -1 --pretty=format:%h) fi - community=$(basename "$(realpath selected_community)" .cfg) { echo "FIRMWARE_VERSION=\"$version\"" - echo "FIRMWARE_COMMUNITY=\"$community\"" echo "BUILD_DATE=\"build date: $(date)\"" echo "OPENWRT_CORE_REVISION=\"${OPENWRTREV}\"" echo "OPENWRT_FEEDS_PACKAGES_REVISION=\"${PACKAGEREV}\"" } > "$target"/files/etc/firmware_release - cp selected_community "$target"/files/etc/community.cfg - opath=$(pwd) cd "$target" make defconfig @@ -274,9 +270,7 @@ config() { } cp_firmware() { - if [ "$community" = "franken" ]; then - local community="fff" - fi + local community="fff" [ -n "$subtarget" ] || subtarget="generic" @@ -350,18 +344,6 @@ loadBSP() . selected_bsp } -loadCommunity() -{ - echo "Working with $(/bin/ls -l selected_community | awk '{ print $11 }')" - tpl_translate=$(awk -F= 'BEGIN{printf("sed")} /^.+$/{gsub("/", "\\/", $0); printf(" -es/\\${%s}/%s/g",$1,$2)}' selected_community) -} - -setCommunity() { - /bin/rm -rf selected_community - /bin/ln -s "$1" selected_community - loadCommunity -} - setBSP() { /bin/rm -rf selected_bsp @@ -382,19 +364,13 @@ if [ "$(/usr/bin/id -u)" -eq 0 ]; then exit 1 fi -if [ "$1" != "selectbsp" -a "$1" != "selectcommunity" ]; then +if [ "$1" != "selectbsp" ]; then if [ ! -h selected_bsp ]; then echo "Please select a Board-Support-Package using:" echo "$0 selectbsp" exit fi - if [ ! -h selected_community ]; then - echo "Please select a community file using:" - echo "$0 selectcommunity" - exit - fi loadBSP - loadCommunity echo fi @@ -415,22 +391,6 @@ case "$1" in fi fi ;; - "selectcommunity") - if [ "$2" = "help" ] || [ "$2" = "" ]; then - echo "Select a Community-File:" - echo - echo "Usage: $0 $1 <community-file>" - echo "available community-files: " - /bin/ls community/*.cfg - echo - else - if [ ! -f "$2" ]; then - echo "Could not find $2" - else - setCommunity "$2" - fi - fi - ;; "prepare") if [ "$2" = "help" ] || [ "$2" = "x" ]; then echo "This option fetches the sources for the images and configurates the build so that it can be compiled" @@ -478,7 +438,7 @@ case "$1" in ;; "buildall") if [ "$2" = "help" ]; then - echo "This option builds the firmware for all routers of a given community." + echo "This option builds the firmware for all routers." echo echo "Usage: $0 $1 [fast]" echo @@ -501,7 +461,6 @@ case "$1" in echo echo "Usage: $0 command" echo "command:" - echo " selectcommunity <community-file>" echo " selectbsp <bsp-file>" echo " prepare" echo " config openwrt" diff --git a/community/franken.cfg b/community/franken.cfg deleted file mode 100644 index 833e98e..0000000 --- a/community/franken.cfg +++ /dev/null @@ -1,8 +0,0 @@ -BATMAN_CHANNEL=1 -BATMAN_CHANNEL_5GHZ=36 -ESSID_AP=franken.freifunk.net -ESSID_MESH=batman.franken.freifunk.net -BSSID_MESH=02:CA:FF:EE:BA:BE -VPN_PROJECT=fff -NTPD_IP=fe80::ff:feee:1%br-mesh -UPGRADE_PATH=http://[fe80::ff:feee:1%br-mesh]/dev/firmware/current diff --git a/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher b/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher index 3b60500..7b7bbd0 100755 --- a/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher +++ b/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher @@ -155,7 +155,6 @@ crawl() { SYSTEM_DATA=$SYSTEM_DATA"$fastd_version" SYSTEM_DATA=$SYSTEM_DATA"<nodewatcher_version>$nodewatcher_version</nodewatcher_version>" SYSTEM_DATA=$SYSTEM_DATA"<firmware_version>$FIRMWARE_VERSION</firmware_version>" - SYSTEM_DATA=$SYSTEM_DATA"<firmware_community>$FIRMWARE_COMMUNITY</firmware_community>" SYSTEM_DATA=$SYSTEM_DATA"<firmware_revision>$BUILD_DATE</firmware_revision>" SYSTEM_DATA=$SYSTEM_DATA"<openwrt_core_revision>$OPENWRT_CORE_REVISION</openwrt_core_revision>" SYSTEM_DATA=$SYSTEM_DATA"<openwrt_feeds_packages_revision>$OPENWRT_FEEDS_PACKAGES_REVISION</openwrt_feeds_packages_revision>" diff --git a/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh b/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh index 8ef4949..ba42f25 100755 --- a/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh +++ b/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh @@ -67,9 +67,7 @@ if [ "$VERSION" -eq "$FIRMWARE_VERSION" ]; then done fi -if [ "$FIRMWARE_COMMUNITY" = "franken" ]; then - FIRMWARE_COMMUNITY="fff" -fi +FIRMWARE_COMMUNITY="fff" FILE="${FIRMWARE_COMMUNITY}-${VERSION}-${SOC}-g-${BOARD}-squashfs-sysupgrade.bin" echo "Downloading $FILE" diff --git a/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header b/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header index dbfb00a..0262054 100755 --- a/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header +++ b/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header @@ -1,7 +1,7 @@ #!/usr/bin/haserl <% -. /etc/community.cfg +. /lib/functions/fff/keyxchange . /etc/firmware_release echo -en "Content-Type: text/html\r\n\r\n" nav_entry() { @@ -12,6 +12,7 @@ nav_entry() { echo -ne "\t<li${class_active}><a href=\"${script_file}\">$2</a></li>\n\t\t" } +UPGRADE_PATH="$(getUpgradePath)" HOSTNAME="$(uci -q get "fff.system.hostname")" hood="$(uci -q get "system.@system[0].hood")"
Sehr schön, daran bin ich immer gescheitert. Erste Kommentare unten. > -----Original Message----- > From: franken-dev [mailto:franken-dev-bounces@freifunk.net] On Behalf > Of Tim Niemeyer > Sent: Montag, 12. Februar 2018 18:04 > To: franken-dev@freifunk.net > Subject: [RFC PATCH] buildscript: remove community config > > The community file is not used anymore. > > Signed-off-by: Tim Niemeyer <tim@tn-x.org> > --- > > buildscript | 47 ++-------------------- > community/franken.cfg | 8 ---- > .../fff/fff-nodewatcher/files/usr/sbin/nodewatcher | 1 - > .../fff/fff-sysupgrade/files/etc/sysupgrade.sh | 4 +- > .../fff/fff-web/files/www/ssl/cgi-bin/header | 3 +- > 5 files changed, 6 insertions(+), 57 deletions(-) delete mode 100644 > community/franken.cfg > > diff --git a/buildscript b/buildscript > index ab092da..898120e 100755 > --- a/buildscript > +++ b/buildscript > @@ -195,18 +195,14 @@ prebuild() { > if [ 0 -ne $? ]; then > version=$(git log -1 --pretty=format:%h) > fi > - community=$(basename "$(realpath selected_community)" .cfg) > > { > echo "FIRMWARE_VERSION=\"$version\"" > - echo "FIRMWARE_COMMUNITY=\"$community\"" > echo "BUILD_DATE=\"build date: $(date)\"" > echo "OPENWRT_CORE_REVISION=\"${OPENWRTREV}\"" > echo "OPENWRT_FEEDS_PACKAGES_REVISION=\"${PACKAGEREV}\"" > } > "$target"/files/etc/firmware_release > > - cp selected_community "$target"/files/etc/community.cfg > - > opath=$(pwd) > cd "$target" > make defconfig > @@ -274,9 +270,7 @@ config() { > } > > cp_firmware() { > - if [ "$community" = "franken" ]; then > - local community="fff" > - fi > + local community="fff" "$community" wird in dem Block nur ein einziges Mal genutzt, würde ich da hardcoden und die Variable rausschmeißen. Falls "fff" noch an mehreren Stellen genutzt wird (ich konnte auf die schnelle keine finden) könnte man auch überlegen, die Variable "community="fff"" einmal am Anfang von buildscript zu setzen. > > [ -n "$subtarget" ] || subtarget="generic" > > @@ -350,18 +344,6 @@ loadBSP() > . selected_bsp > } > > -loadCommunity() > -{ > - echo "Working with $(/bin/ls -l selected_community | awk '{ print $11 }')" > - tpl_translate=$(awk -F= 'BEGIN{printf("sed")} /^.+$/{gsub("/", "\\/", $0); > printf(" -es/\\${%s}/%s/g",$1,$2)}' selected_community) > -} > - > -setCommunity() { > - /bin/rm -rf selected_community > - /bin/ln -s "$1" selected_community > - loadCommunity > -} > - > setBSP() > { > /bin/rm -rf selected_bsp > @@ -382,19 +364,13 @@ if [ "$(/usr/bin/id -u)" -eq 0 ]; then > exit 1 > fi > > -if [ "$1" != "selectbsp" -a "$1" != "selectcommunity" ]; then > +if [ "$1" != "selectbsp" ]; then > if [ ! -h selected_bsp ]; then > echo "Please select a Board-Support-Package using:" > echo "$0 selectbsp" > exit > fi > - if [ ! -h selected_community ]; then > - echo "Please select a community file using:" > - echo "$0 selectcommunity" > - exit > - fi > loadBSP > - loadCommunity > echo > fi > > @@ -415,22 +391,6 @@ case "$1" in > fi > fi > ;; > - "selectcommunity") > - if [ "$2" = "help" ] || [ "$2" = "" ]; then > - echo "Select a Community-File:" > - echo > - echo "Usage: $0 $1 <community-file>" > - echo "available community-files: " > - /bin/ls community/*.cfg > - echo > - else > - if [ ! -f "$2" ]; then > - echo "Could not find $2" > - else > - setCommunity "$2" > - fi > - fi > - ;; > "prepare") > if [ "$2" = "help" ] || [ "$2" = "x" ]; then > echo "This option fetches the sources for the images and configurates > the build so that it can be compiled" > @@ -478,7 +438,7 @@ case "$1" in > ;; > "buildall") > if [ "$2" = "help" ]; then > - echo "This option builds the firmware for all routers of a given > community." > + echo "This option builds the firmware for all routers." > echo > echo "Usage: $0 $1 [fast]" > echo > @@ -501,7 +461,6 @@ case "$1" in > echo > echo "Usage: $0 command" > echo "command:" > - echo " selectcommunity <community-file>" > echo " selectbsp <bsp-file>" > echo " prepare" > echo " config openwrt" > diff --git a/community/franken.cfg b/community/franken.cfg deleted file > mode 100644 index 833e98e..0000000 > --- a/community/franken.cfg > +++ /dev/null > @@ -1,8 +0,0 @@ > -BATMAN_CHANNEL=1 > -BATMAN_CHANNEL_5GHZ=36 > -ESSID_AP=franken.freifunk.net > -ESSID_MESH=batman.franken.freifunk.net > -BSSID_MESH=02:CA:FF:EE:BA:BE > -VPN_PROJECT=fff > -NTPD_IP=fe80::ff:feee:1%br-mesh > -UPGRADE_PATH=http://[fe80::ff:feee:1%br-mesh]/dev/firmware/current > diff --git a/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher > b/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher > index 3b60500..7b7bbd0 100755 > --- a/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher > +++ b/src/packages/fff/fff-nodewatcher/files/usr/sbin/nodewatcher > @@ -155,7 +155,6 @@ crawl() { > SYSTEM_DATA=$SYSTEM_DATA"$fastd_version" > > SYSTEM_DATA=$SYSTEM_DATA"<nodewatcher_version>$nodewatcher_ver > sion</nodewatcher_version>" > > SYSTEM_DATA=$SYSTEM_DATA"<firmware_version>$FIRMWARE_VERSION > </firmware_version>" > - > SYSTEM_DATA=$SYSTEM_DATA"<firmware_community>$FIRMWARE_COM > MUNITY</firmware_community>" Ich würde das im XML drinlassen und fest "fff" oder "franken" senden. > > SYSTEM_DATA=$SYSTEM_DATA"<firmware_revision>$BUILD_DATE</firmwa > re_revision>" > > SYSTEM_DATA=$SYSTEM_DATA"<openwrt_core_revision>$OPENWRT_COR > E_REVISION</openwrt_core_revision>" > > SYSTEM_DATA=$SYSTEM_DATA"<openwrt_feeds_packages_revision>$OPE > NWRT_FEEDS_PACKAGES_REVISION</openwrt_feeds_packages_revision>" > diff --git a/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh > b/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh > index 8ef4949..ba42f25 100755 > --- a/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh > +++ b/src/packages/fff/fff-sysupgrade/files/etc/sysupgrade.sh > @@ -67,9 +67,7 @@ if [ "$VERSION" -eq "$FIRMWARE_VERSION" ]; then > done > fi > > -if [ "$FIRMWARE_COMMUNITY" = "franken" ]; then > - FIRMWARE_COMMUNITY="fff" > -fi > +FIRMWARE_COMMUNITY="fff" Wie oben beim buildscript: $ FIRMWARE_COMMUNITY wird nur einmal benutzt, würde ich in in "FILE=" hardcoden. > > FILE="${FIRMWARE_COMMUNITY}-${VERSION}-${SOC}-g-${BOARD}- > squashfs-sysupgrade.bin" > echo "Downloading $FILE" > diff --git a/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header > b/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header > index dbfb00a..0262054 100755 > --- a/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header > +++ b/src/packages/fff/fff-web/files/www/ssl/cgi-bin/header > @@ -1,7 +1,7 @@ > #!/usr/bin/haserl > > <% > -. /etc/community.cfg > +. /lib/functions/fff/keyxchange > . /etc/firmware_release > echo -en "Content-Type: text/html\r\n\r\n" > nav_entry() { > @@ -12,6 +12,7 @@ nav_entry() { > echo -ne "\t<li${class_active}><a > href=\"${script_file}\">$2</a></li>\n\t\t" > } > > +UPGRADE_PATH="$(getUpgradePath)" Das sollte man vll. noch separat als BugFix-Patch machen, damit die Update-Notification für V2 geht? Grüße Adrian > HOSTNAME="$(uci -q get "fff.system.hostname")" > hood="$(uci -q get "system.@system[0].hood")" > > -- > 2.11.0 > > -- > franken-dev mailing list > franken-dev@freifunk.net > http://lists.freifunk.net/mailman/listinfo/franken-dev-freifunk.net
The community file is not used anymore. Signed-off-by: Tim Niemeyer <tim@tn-x.org> --- buildscript | 47 ++-------------------- community/franken.cfg | 8 ---- .../fff/fff-nodewatcher/files/usr/sbin/nodewatcher | 1 - .../fff/fff-sysupgrade/files/etc/sysupgrade.sh | 4 +- .../fff/fff-web/files/www/ssl/cgi-bin/header | 3 +- 5 files changed, 6 insertions(+), 57 deletions(-) delete mode 100644 community/franken.cfg