diff --git a/bsp/ar71xx/.config b/bsp/ar71xx/.config
index b407f7d..8ecf51a 100644
--- a/bsp/ar71xx/.config
+++ b/bsp/ar71xx/.config
@@ -18,6 +18,8 @@ CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-mr3020-v1=y
 CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-mr3020-v1=""
 CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa850re-v1=y
 CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wa850re-v1=""
+#CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa850re-v2=y
+#CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wa850re-v2=""
 CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa860re-v1=y
 CONFIG_TARGET_DEVICE_PACKAGES_ar71xx_generic_DEVICE_tl-wa860re-v1=""
 CONFIG_TARGET_DEVICE_ar71xx_generic_DEVICE_tl-wa901nd-v2=y
diff --git a/bsp/board_ar71xx.bsp b/bsp/board_ar71xx.bsp
index 1137b0d..5fb24c0 100644
--- a/bsp/board_ar71xx.bsp
+++ b/bsp/board_ar71xx.bsp
@@ -21,6 +21,7 @@ images=("lede-ar71xx-generic-cpe210-220-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-tl-wr1043nd-v4-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-tl-wa860re-v1-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-tl-wa850re-v1-squashfs-sysupgrade.bin"
+#        "lede-ar71xx-generic-tl-wa850re-v2-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-tl-wa901nd-v2-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-gl-ar150-squashfs-sysupgrade.bin"
         "lede-ar71xx-generic-tl-mr3020-v1-squashfs-sysupgrade.bin"
diff --git a/build_patches/openwrt/0009-ar71xx-add-support-for-TP-Link-TL-WA850RE-v2.patch b/build_patches/openwrt/0009-ar71xx-add-support-for-TP-Link-TL-WA850RE-v2.patch
new file mode 100644
index 0000000..3a69ce4
--- /dev/null
+++ b/build_patches/openwrt/0009-ar71xx-add-support-for-TP-Link-TL-WA850RE-v2.patch
@@ -0,0 +1,433 @@
+From 90bccc9510f66b26ff5bd324d31752676317bdcf Mon Sep 17 00:00:00 2001
+From: Piotr Dymacz <pepe2k@gmail.com>
+Date: Fri, 10 Feb 2017 13:44:06 +0100
+Subject: [PATCH] ar71xx: add support for TP-Link TL-WA850RE v2
+
+TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender,
+based on Qualcomm/Atheros QCA9533 v2.
+
+Short specification:
+
+- 550/391/195 MHz (CPU/DDR/AHB)
+- 1x 10/100 Mbps Ethernet
+- 32 MB of RAM (DDR1)
+- 4 MB of FLASH
+- 2T2R 2.4 GHz
+- 2x internal antennas (embedded on PCB)
+- 9x LED (all can be turned off with GPIO15), 2x button
+- UART (J3) header on PCB
+
+Flash instruction: use "factory" image directly in vendor GUI.
+
+Warning: this device does not include any kind of recovery mechanism
+in the bootloader and disassembling process is not trivial.
+
+You can access vendor firmware over serial line using:
+- login: root
+- password: sohoadmin
+
+Image was tested only in US version of the device, but should work
+also with the same device version sold in other countries.
+
+Available FLASH space, with LEDE trunk, is only 240 KB.
+
+Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
+[Rebased on 8ad1b09]
+Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
+---
+ target/linux/ar71xx/base-files/etc/board.d/01_leds |   3 +-
+ .../linux/ar71xx/base-files/etc/board.d/02_network |   1 +
+ target/linux/ar71xx/base-files/etc/diag.sh         |   3 +-
+ target/linux/ar71xx/base-files/lib/ar71xx.sh       |   3 +
+ .../ar71xx/base-files/lib/upgrade/platform.sh      |   1 +
+ target/linux/ar71xx/config-4.4                     |   1 +
+ .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt   |   9 ++
+ target/linux/ar71xx/files/arch/mips/ath79/Makefile |   1 +
+ .../ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c | 103 ++++++++++++++++++++-
+ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h |   1 +
+ target/linux/ar71xx/image/tp-link.mk               |  16 +++-
+ target/linux/ar71xx/mikrotik/config-default        |   1 +
+ target/linux/ar71xx/nand/config-default            |   1 +
+ tools/firmware-utils/src/tplink-safeloader.c       |  43 +++++++++
+ 14 files changed, 182 insertions(+), 5 deletions(-)
+
+diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
+index e1efb56..b98f58e 100755
+--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
++++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
+@@ -568,7 +568,8 @@ tl-wa801nd-v3)
+ 	ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
+ 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
+ 	;;
+-tl-wa850re)
++tl-wa850re|\
++tl-wa850re-v2)
+ 	ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
+ 	ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
+ 	ucidef_set_rssimon "wlan0" "200000" "1"
+diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
+index 24ead87..d5b6fba 100755
+--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
++++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
+@@ -106,6 +106,7 @@ ar71xx_setup_interfaces()
+ 	tl-wa801nd-v2|\
+ 	tl-wa830re-v2|\
+ 	tl-wa850re|\
++	tl-wa850re-v2|\
+ 	tl-wa901nd|\
+ 	tl-wa901nd-v2|\
+ 	tl-wa901nd-v3|\
+diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
+index 38cc5d7..f2709d7 100644
+--- a/target/linux/ar71xx/base-files/etc/diag.sh
++++ b/target/linux/ar71xx/base-files/etc/diag.sh
+@@ -340,7 +340,8 @@ get_status_led() {
+ 	tl-wa750re)
+ 		status_led="tp-link:orange:re"
+ 		;;
+-	tl-wa850re)
++	tl-wa850re|\
++	tl-wa850re-v2)
+ 		status_led="tp-link:blue:re"
+ 		;;
+ 	tl-wa860re)
+diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
+index 46711af..b793223 100755
+--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
++++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
+@@ -986,6 +986,9 @@ ar71xx_board_detect() {
+ 	*TL-WA850RE)
+ 		name="tl-wa850re"
+ 		;;
++	*"TL-WA850RE v2")
++		name="tl-wa850re-v2"
++		;;
+ 	*TL-WA860RE)
+ 		name="tl-wa860re"
+ 		;;
+diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+index e65f6e2..cac9409 100755
+--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
++++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+@@ -397,6 +397,7 @@ platform_check_image() {
+ 	tl-wa801nd-v3|\
+ 	tl-wa830re-v2|\
+ 	tl-wa850re|\
++	tl-wa850re-v2|\
+ 	tl-wa860re|\
+ 	tl-wa901nd-v2|\
+ 	tl-wa901nd-v3|\
+diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
+index 0187775..3fdc9a0 100644
+--- a/target/linux/ar71xx/config-4.4
++++ b/target/linux/ar71xx/config-4.4
+@@ -168,6 +168,7 @@ CONFIG_ATH79_MACH_TL_WA701ND_V2=y
+ CONFIG_ATH79_MACH_TL_WA7210N_V2=y
+ CONFIG_ATH79_MACH_TL_WA801ND_V3=y
+ CONFIG_ATH79_MACH_TL_WA830RE_V2=y
++CONFIG_ATH79_MACH_TL_WA850RE_V2=y
+ CONFIG_ATH79_MACH_TL_WA901ND=y
+ CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+ CONFIG_ATH79_MACH_TL_WA901ND_V4=y
+diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+index 4112fd3..a48db65 100644
+--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
++++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+@@ -1369,6 +1369,15 @@ config ATH79_MACH_TL_WA830RE_V2
+ 	select ATH79_DEV_USB
+ 	select ATH79_DEV_WMAC
+ 
++config ATH79_MACH_TL_WA850RE_V2
++	bool "TP-LINK TL-WA850RE v2 support"
++	select SOC_QCA953X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_WA901ND
+ 	bool "TP-LINK TL-WA901ND/TL-WA7510N support"
+ 	select SOC_AR724X
+diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+index 3365a43..71995de 100644
+--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
++++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+@@ -172,6 +172,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2)		+= mach-tl-wa701nd-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2)		+= mach-tl-wa7210n-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3)		+= mach-tl-wa801nd-v3.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2)		+= mach-tl-wa830re-v2.o
++obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2)		+= mach-tl-wax50re.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND)		+= mach-tl-wa901nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2)		+= mach-tl-wa901nd-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4)		+= mach-tl-wa901nd-v4.o
+diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
+index 965b1cd..d7a1af4 100644
+--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
++++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
+@@ -1,9 +1,13 @@
+ /*
+- *  TP-LINK TL-WA750RE v1/TL-WA801ND v2/TL-WA850RE v1/TL-WA901ND v3
+- *  board support
++ *  Support for TP-Link boards:
++ *  - TL-WA750RE v1
++ *  - TL-WA801ND v2
++ *  - TL-WA850RE v1/v2
++ *  - TL-WA901ND v3
+  *
+  *  Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
+  *  Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
++ *  Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+@@ -33,6 +37,17 @@
+ #define TL_WAX50RE_GPIO_LED_SIGNAL4	3
+ #define TL_WAX50RE_GPIO_LED_SIGNAL5	4
+ 
++#define TL_WA850RE_V2_GPIO_LED_LAN	14
++#define TL_WA850RE_V2_GPIO_LED_RE	12
++#define TL_WA850RE_V2_GPIO_LED_SIGNAL1	0
++#define TL_WA850RE_V2_GPIO_LED_SIGNAL2	1
++#define TL_WA850RE_V2_GPIO_LED_SIGNAL3	2
++#define TL_WA850RE_V2_GPIO_LED_SIGNAL4	3
++#define TL_WA850RE_V2_GPIO_LED_SIGNAL5	4
++#define TL_WA850RE_V2_GPIO_LED_WLAN	13
++
++#define TL_WA850RE_V2_GPIO_ENABLE_LEDS	15
++
+ #define TL_WA860RE_GPIO_LED_WLAN_ORANGE	0
+ #define TL_WA860RE_GPIO_LED_WLAN_GREEN	2
+ #define TL_WA860RE_GPIO_LED_POWER_ORANGE	12
+@@ -133,6 +148,42 @@ static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
+ 	},
+ };
+ 
++static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
++	{
++		.name		= "tp-link:blue:lan",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_LAN,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:re",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_RE,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal1",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_SIGNAL1,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal2",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_SIGNAL2,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal3",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_SIGNAL3,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal4",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_SIGNAL4,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:signal5",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_SIGNAL5,
++		.active_low	= 1,
++	}, {
++		.name		= "tp-link:blue:wlan",
++		.gpio		= TL_WA850RE_V2_GPIO_LED_WLAN,
++		.active_low	= 1,
++	},
++};
++
+ static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
+ 	{
+ 		.name		= "tp-link:green:lan",
+@@ -242,6 +293,30 @@ static void __init tl_ap123_setup(void)
+ 	ath79_register_wmac(ee, mac);
+ }
+ 
++static void __init tl_ap143_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++	u8 tmpmac[ETH_ALEN];
++
++	ath79_register_m25p80(NULL);
++
++	ath79_setup_ar933x_phy4_switch(false, false);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_switch_data.phy4_mii_en = 1;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
++	ath79_register_eth(0);
++
++	ath79_init_mac(tmpmac, mac, 0);
++	ath79_register_wmac(ee, mac);
++}
++
+ static void  __init tl_wa750re_setup(void)
+ {
+ 	tl_ap123_setup();
+@@ -284,6 +359,30 @@ static void  __init tl_wa850re_setup(void)
+ MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
+ 	     tl_wa850re_setup);
+ 
++static void  __init tl_wa850re_v2_setup(void)
++{
++	tl_ap143_setup();
++
++	/* For GPIO 0~4 */
++	ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
++				  AR934X_GPIO_FUNC_CLK_OBS4_EN);
++
++	/* Allow to enable/disable all LEDs from userspace */
++	gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
++			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
++			 "LEDs enable");
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
++				 tl_wa850re_v2_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(tl_wax50re_gpio_keys),
++					tl_wax50re_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
++	     "TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
++
+ static void  __init tl_wa860re_setup(void)
+ {
+ 	tl_ap123_setup();
+diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+index 8864e0d..61d2225 100644
+--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
++++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+@@ -202,6 +202,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_TL_WA801ND_V3,		/* TP-LINK TL-WA801ND v3 */
+ 	ATH79_MACH_TL_WA830RE_V2,		/* TP-LINK TL-WA830RE v2 */
+ 	ATH79_MACH_TL_WA850RE,			/* TP-LINK TL-WA850RE */
++	ATH79_MACH_TL_WA850RE_V2,		/* TP-LINK TL-WA850RE v2 */
+ 	ATH79_MACH_TL_WA860RE,			/* TP-LINK TL-WA860RE */
+ 	ATH79_MACH_TL_WA901ND,			/* TP-LINK TL-WA901ND */
+ 	ATH79_MACH_TL_WA901ND_V2,		/* TP-LINK TL-WA901ND v2 */
+diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
+index 32d16f9..3b908ac 100644
+--- a/target/linux/ar71xx/image/tp-link.mk
++++ b/target/linux/ar71xx/image/tp-link.mk
+@@ -974,6 +974,20 @@ define Device/tl-wa850re-v1
+     TPLINK_HWID := 0x08500001
+ endef
+ 
++define Device/tl-wa850re-v2
++    $(Device/tplink)
++    DEVICE_TITLE := TP-LINK TL-WA850RE v2
++    DEVICE_PACKAGES := rssileds
++    BOARDNAME := TL-WA850RE-V2
++    DEVICE_PROFILE := TLWA850
++    TPLINK_BOARD_NAME := TLWA850REV2
++    TPLINK_HWID := 0x08500002
++    KERNEL := kernel-bin | patch-cmdline | lzma | mktplinkfw-kernel
++    IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
++    IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
++    MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
++endef
++
+ define Device/tl-wa860re-v1
+     $(Device/tplink-4mlzma)
+     DEVICE_TITLE := TP-LINK TL-WA860RE
+@@ -981,7 +995,7 @@ define Device/tl-wa860re-v1
+     DEVICE_PROFILE := TLWA860
+     TPLINK_HWID := 0x08600001
+ endef
+-TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
++TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa850re-v2 tl-wa860re-v1
+ 
+ define Device/tl-wa901nd-v1
+     $(Device/tplink-4m)
+diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
+index 376835a..6375b7f 100644
+--- a/target/linux/ar71xx/mikrotik/config-default
++++ b/target/linux/ar71xx/mikrotik/config-default
+@@ -133,6 +133,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
+ # CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
+ # CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
+ # CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
++# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
+ # CONFIG_ATH79_MACH_TL_WA901ND is not set
+ # CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
+ # CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
+diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
+index 62be218..8c67867 100644
+--- a/target/linux/ar71xx/nand/config-default
++++ b/target/linux/ar71xx/nand/config-default
+@@ -47,6 +47,7 @@
+ # CONFIG_ATH79_MACH_TL_MR13U is not set
+ # CONFIG_ATH79_MACH_TL_MR3020 is not set
+ # CONFIG_ATH79_MACH_TL_MR3X20 is not set
++# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
+ # CONFIG_ATH79_MACH_TL_WA901ND is not set
+ # CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
+ # CONFIG_ATH79_MACH_TL_WDR3500 is not set
+diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
+index 2468426..82a5fe5 100644
+--- a/tools/firmware-utils/src/tplink-safeloader.c
++++ b/tools/firmware-utils/src/tplink-safeloader.c
+@@ -441,6 +441,49 @@ static struct device_info boards[] = {
+ 		.last_sysupgrade_partition = "file-system"
+ 	},
+ 
++	/** Firmware layout for the TL-WA850RE v2 */
++	{
++		.id     = "TLWA850REV2",
++		.vendor = "",
++		.support_list =
++			"SupportList:\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55530000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:00000000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:55534100}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:45550000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4B520000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:42520000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:4A500000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:43410000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
++			"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
++		.support_trail = '\x00',
++
++		/**
++		   576KB were moved from file-system to os-image
++		   in comparison to the stock image
++		*/
++		.partitions = {
++			{"fs-uboot", 0x00000, 0x20000},
++			{"os-image", 0x20000, 0x150000},
++			{"file-system", 0x170000, 0x240000},
++			{"partition-table", 0x3b0000, 0x02000},
++			{"default-mac", 0x3c0000, 0x00020},
++			{"pin", 0x3c0100, 0x00020},
++			{"product-info", 0x3c1000, 0x01000},
++			{"soft-version", 0x3c2000, 0x00100},
++			{"support-list", 0x3c3000, 0x01000},
++			{"profile", 0x3c4000, 0x08000},
++			{"user-config", 0x3d0000, 0x10000},
++			{"default-config", 0x3e0000, 0x10000},
++			{"radio", 0x3f0000, 0x10000},
++			{NULL, 0, 0}
++		},
++
++		.first_sysupgrade_partition = "os-image",
++		.last_sysupgrade_partition = "file-system"
++	},
++
+ 	/** Firmware layout for the TL-WR1043 v4 */
+ 	{
+ 		.id     = "TLWR1043NDV4",
+-- 
+2.7.4
+
diff --git a/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-v2 b/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-v2
new file mode 100644
index 0000000..307a201
--- /dev/null
+++ b/src/packages/fff/fff-network/ar71xx/network.tl-wa850re-v2
@@ -0,0 +1,11 @@
+WANDEV=eth0
+SWITCHDEV=eth0
+CLIENT_PORTS=""
+WAN_PORTS=""
+BATMAN_PORTS=""
+ONE_PORT="YES"
+
+. /etc/network.mode
+
+ETHMESHMAC=
+ROUTERMAC=w2mesh
\ No newline at end of file
