@@ -1,7 +1,6 @@
machine=ar71xx
chipset=ar71xx
subtarget=tiny
-target=$builddir/$machine
images=("openwrt-${chipset}-${subtarget}-archer-c25-v1-squashfs-sysupgrade.bin"
"openwrt-${chipset}-${subtarget}-archer-c60-v1-squashfs-sysupgrade.bin"
"openwrt-${chipset}-${subtarget}-archer-c7-v2-squashfs-sysupgrade.bin"
@@ -1,7 +1,6 @@
machine=mt7621
chipset=ramips
subtarget=mt7621
-target=$builddir/$machine
images=(
"openwrt-ramips-mt7621-ubnt-erx-squashfs-sysupgrade.tar"
@@ -1,7 +1,6 @@
machine=wdr4900
chipset=mpc85xx
subtarget=generic
-target=$builddir/$machine
images=(
"openwrt-${chipset}-${subtarget}-tl-wdr4900-v1-squashfs-sysupgrade.bin"
@@ -169,7 +169,7 @@ prepare() {
#saves ~200MB for each build
test -d ./src/dl || mkdir ./src/dl
- ln -s ../../src/dl "$target"/dl
+ ln -s ../src/dl "$target"/dl
}
prebuild() {
@@ -339,6 +339,7 @@ loadBSP()
{
echo "Working with $(/bin/ls -l selected_bsp | awk '{ print $11 }')"
. selected_bsp
+ target=$builddir
}
loadVariant()
So far, building the firmware happens in parallel subdirectories of "build", one for each subtarget. However, OpenWrt itself is capable of hosting several target builds in its directory, so there is no need for this extra separation. This patch thus build all targets/subtargets directly in the "build" folder. Since most of the time during build is spent for the toolchain, this will also significantly boost build time if more than one target is used. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> --- v2: no change --- bsp/board_ar71xx.bsp | 1 - bsp/board_mt7621.bsp | 1 - bsp/board_wdr4900.bsp | 1 - buildscript | 3 ++- 4 files changed, 2 insertions(+), 4 deletions(-)